Of course, the article will only be useful for people with little to no experience in the world of EP. If you have already set up your turntable and connected it with the transducer you are past the phonograph input stage now. Check out this best receiver for vinyl expert review to find out how to get the best out of your platters. There are some amazing affordable options that you need to know about.

If you still have some doubts or perhaps you struggle with getting everything to work together then keep on running.

What is a Preamp for a Turntable

I will try to give you a quick update on the topic what is a phono preamp? It is as simple as an ABC. This tool allows you to listen to your vinyl. Yes, it is all that easy. These devices can be sold separately, they can be integrated into your tweeters, transducers, or even the turntables themselves.

The input amplifier creates a signal that can be read by all speaker devices. All true die-hard turntable lovers prefer to buy separate ones in order to have all the intensifier power at their fingertips. And phono meaning is short for phonograph aka gramophone aka turntable.

What does a Phono Preamp do?

The preliminary intensifier is needed for decoding the signal. Basically, the data from your phonograph is being turned into the data accepted on all types of speakers. The signal is being transformed into a line-level signal. This is the most basic and easy explanation I can offer. I hope now you know everything about the purpose of a preamp and its operation principle.

The second function of the preliminary intensifier is to straighten out the RIAA equalization curve giving you a proper genuine signal with an original quality without any distortions. Now you can consider yourself to be an intensifier pro.

Devices

It is fairly easy to tell if you have one on your gramophone, transducer, or speaker. Some of the newer turntables do come with an intensifier. Just plug it directly into the speakers to try. If the sound does come out it means that you already have it. Extremely unlikely for the models produced in the 80s and the 90s though.

The transducer you have might also come with an intensifier. Especially the ones made in the previous decades, those always have them. Once again tune in and try to play vinyl through the receiver. If it works then you’re all set.

Modern powered speakers might have the intensifiers built-in as well. Those are made specifically with the LP fans like me and you in mind. Buy yourself one of those they start at $100 regular retail price.

Or if you want to listen to your platters like a pro buy yourself a separate intensifier that can be connected through the wire and use it together with the transducer, player, and tweeters. Or you can also just use it to connect the player and the speakers. Enjoy!